Molybdenum
Foil
Material below
.005 inches in thickness is classified as foil. Typical uses for it are
production of drawn parts, electronic components, metallizing
sources, furnace insulation and chemically etched parts. Molybdenum foil has
the ability to be etched into fine patterns, which makes it useful to the
semiconductor industry. Standard availability is described below. Other sizes
and tolerances are quoted on request.
|
Thickness |
Max. Width |
|
.001" - .002" |
12" |
|
.002" - .003" |
12" |
|
.003" - .005" |
12" |
Molybdenum
Foil Standard Thickness Tolerance
|
Thickness |
.25" to 12" |
|
.001" - .005" |
± .0002" |
Molybdenum
Foil Standard Width Tolerance
|
Thickness |
.25" to 6" |
6" to 12" |
|
.001" - .004" |
± .008" |
± .012" |
|
.004" - .005" |
± .010" |
± .015" |
Surface
Condition
Surface
can be supplied in a mirror or matte finish; dependent upon thickness and width
parameters.
Heat
Treatment
Molybdenum
flat products are rolled and annealed to provide the optimum condition for the
desired end use (Furnace, Punch, Deep Draw).